CooperInterconnectLogo
home about us Crouse-Hinds employment
 

Features


MATERIALS & FINISH Shells:

Plugs — Aluminum alloy body, steel alloy nosepiece .0003 cadmium plate with olive drab chromate.
Receptacles — Brass, .0003 cadmium plate with olive drab chromate.
Nosepieces — Alloy steel, .0003 dacmium plate with olive drab chromate.
Drawscrews — Stainless steel.

Contacts:

Socket — High conductivity copper alloy with beryllium copper spring element, .000030 gold over 50-100 nickel.
Pin — Yellow brass, .000030 gold over 50-100 nickel.
Insulators — Glass-filled diallyl phthalate, type GDI-30 F or SDG-F.



crossrule_orange

Specifications


ELECTRICAL Dielectric Strength

4, 9 & 14 contacts — 2800 V RMS.
19 Contacts — 2000 V RMS.
Insulation Resistance — 1000 Megohms min. at 500 V DC.
Voltage Drop
4 Contact — 20 MV at 35 A.
9, 18 Contact — 21 MV at 20 A.

MECHANICAL

Air Pressure — 2.5 psi.
Water Immersion — 6 ft., 48 hours.
Durability — 500 cycles with a coupling torque of 25 in. -lbs.
Contact Retention — 15 lbs.
Insert Strength — 400 lbs.
 

POWER-MIL UW SERIES MIL-C-12520

The UW connectors meet all requirements of MIL-C-12520 for the latest revision. These connectors are rugged, proven reliable, and are designed for power and control interconnections. Featured is a center-locking, double-lead screw for maximum reliability, with a fold-down, wing-blade handle. They are waterproof and can withstand the extreme range of environmental conditions encountered by ground support equipment. 		 

Contact

Cooper Interconnect
723 Front Street
Salem, NJ 08079
P: 856-935-7560
F: 856-935-0102
info@cooperinterconnect.com

crossrule_green


Power-Mil UW Series MIL-C-12520

  Cooper Interconnect is a trademark of Cooper Crouse-Hinds, LLC. © 2007-2010 Cooper Crouse-Hinds, LLC.