CooperInterconnectLogo
home about us Crouse-Hinds employment
 

Features


MATERIALS & FINISH

Shells:
Plugs - Aluminum alloy body, steel alloy nosepiece .0003 cadmium plate with olive drab chromate.
Receptacles - Brass, .0003 cadmium plate with olive drab chromate.
Nosepieces - Alloy steel, .0003 dacmium plate with olive drab chromate.
Drawscrews - Stainless steel.

Contacts:
Socket - High conductivity copper alloy with beryllium copper spring element, .000030 gold over 50-100 nickel.
Pin - Yellow brass, .000030 gold over 50-100 nickel.
Insulators - Glass-filled diallyl phthalate, type GDI-30 F or SDG-F.

crossrule_orange

Specifications


ELECTRICAL

Dielectric Strength:
4 contact - 2000 V RMS.
9, 18 contact - 1500 V RMS.
Insulation Resistance - 1000 Megohms min. at 500 V DC.
Voltage Drop:
4 Contact - 20 MV at 35A.
9, 18 Contact - 25 MV at 7.5A.

MECHANICAL

Air Pressure — 2.5 psi.
Water Immersion — 6 ft., 48 hours.
Durability — 500 cycles with a coupling torque of 12 in. -lbs.
Contact Retention — 10 lbs.
Insert Strength — 400 lbs.
 

POWER-MIL MW SERIES QPL MIL-C-55181E

The MW connectors meet all requirements of MIL-C-55181 for the latest QPL revision. These connectors are similar in construction to the UW series, but provide greater contact density in the 18-pin configuration. These are used exclusively in the U.S. Army's VRC-12 communication system, as well as other applications. 		 

Contact

Cooper Interconnect
23 Front Street
Salem, NJ 08079
P: 856-935-7560
F: 856-935-0102
info@cooperinterconnect.com

crossrule_green


Power-Mil MW Series QPL MIL-C-55181

  Cooper Interconnect is a trademark of Cooper Crouse-Hinds, LLC. © 2007-2010 Cooper Crouse-Hinds, LLC.