Features • Shell Types - Lanyard plug available in Type 1 or Type 2 lanyard style construction
• Sizes & Insert Patterns** - Size 17 thru 25 (Mil-STD E thru J) and most insert arrangements
• Durability - 500 cycles of mating and unmating
• Shielding Effectiveness
Class F: EMI leakage attenuation, greater than 90dB at 100 MHz, and greater than 65dB at 10 GHZ. Shell-to-Shell conductivity, 1.0 millivolt maximum voltage drop.
Class W: EMI leakage attenuation, greater that 90dB at 100MHz, and greater than 50dB at 10GHz. Shell-to-Shell conductivity, 2.5 millivolt maximum voltage drop.
• Fluid Immersion - Connectors withstand specified immersions in various fuels, solvents, coolants and oils, per MIL-STD-1344, Method 1016
Specifications
• Temperature Range
Class F: -65°C (-85°F) to +200°C (392°F)
Class W: -65°C (-85°F) to +175°C (347°F)
• Vibration - Mated connectors, with weights attached to simulate rear accessory loads, withstand the following vibration levels:
Sine vibration per MIL-STD-202, Method 204, Condition G
Random vibration per MIL-STD-1344, Method 2005, Condition VI, Letter "j"
• Corrosion Resistance
Class F: withstand 48 hours Salt Spray
Class W: withstand 500 hours Salt Spray
|
|
|
SERIES III Lanyard Connectors
The dependability and performance of D38999 Series III, combined with a low-force lanyard release mechanism that can be tuned to forces below 25 pounds. Developed and qualified at over 850 knots for use on aircraft canopy release systems, these connectors not only meet the functional requirements of D38999, but over ninety percent (90%) of the shock and vibration requirements.
The Cooper Interconnect G3L Series of lanyard connectors is another in a long line of advanced, highly reliable, electronic, electromechanical and mechanical connector components from Cooper Interconnect. Built on the MIL-C-38999 Series III platform, Cooper Interconnect offers a full line of QPL connectors in accordance with D38999/29/30 and /31*1 and /31*2. In addition, Cooper Interconnect offers a Series IV lanyard connector and can custom design a connector to meet low-force release requirements and special insert patterns.
An environmental connector, the G3L is intended for use in mechanical release applications (MIL-STD-1760), including umbilical release and staging. These connectors employ all the same features as the standard Series III plugs and provide the same high levels of quality, performance and durability.
|
|
Contact Cooper Interconnect
750 West Ventura Boulevard
Camarillo, CA 93010
P: 805-484-0543
F: 805-987-5062
info@cooperinterconnect.com
SERIES III Lanyard Connectors |
|
