Features
• Six replaceable connector modules permit variations in contact mix.
• Anti-bind roll-off shells,
• 360 degree EMP shell continuity on each individual connector module.
• Separation time 9 milliseconds max
• Visual and tactile mate and tinmate indicators.
• Independent fallsafe separation mode is activated by cable bundle pull.
• Center acme screw affords easy mate and unmate operation.
Specifications
• Module Contact Arrangements:
(a) 222 #22
(b) 101 #20 & 27 #16
(c) 14 #12, 1 RG 393 & 9 RG 142 or RG 180 COAX.
(Modules a, b & c may be intermixed for any desired combination of 6.)
• Weight:
Plug - 4-1/4 pounds maximum
Receptacle - 1 0-1/2 pounds maximum
1 0-3/4 pounds with optional mounting stand-off.
|
|
|
EMI/RFI FILTER CONNECTORS
Cooper Interconnect's EMI filter connectors are used in harsh electrical and environmental applications to reduce electromagnetic interference while allowing the desired signals to pass. Cooper Interconnect's unique approach to a planar filter connector design offers the best electrical performance in the smallest possible package. Cooper Interconnect's high reliability solution to filtering a connector can be applied to any type of high performance connector where additional EMI / RFI protection is needed.
Additional advantages of a filter connector are the elimination of external filter circuits, greater reliability due to fewer connections and solder junctions. Epoxy encapsulation in strategic areas of the connector ensures the filter elements are protected during handling and from harsh environmental conditions. To verify compliance to the customer's specifications, all connectors are tested prior to shipment and are ready for system installation.
Cooper Interconnect's mission is to remain in the forefront of excellence and to remain a worldwide leader in quality, reliability and short delivery times. We are proud of our ISO 9001 Certification and our ability to engineer solutions.
The critical and unforgiving environments of space, aerospace, hydrospace, cryogenics, nuclear, electromagnetic and optics demand nothing less.
C Feed Thru Capacitor
The C Filter is a low inductance, feedthru capacitor. It is used to attenuate high frequency signals.
L Filter
The L filter consists of one Capacitive element and one inductive element. This type of filter may be used with either a low impedance source and a high impedance load or a high impedance load.
Pi Filter
The Pi Filter consists of two Capacitive elements and one inductive element. It provides better high frequency performance than C or L due to sharper rolloff and is designed for high or unknown impedance load and source applications.
T Filter
The T Filter consists of one Capacitive element and two inductive elements. It has similar performance characteristics to the Pi Filter in that the T Filter provides for a sharper rolloff than C or L Filters. It is best suited for low impedance load and source applications.
Determining Impedance Vs. Insertion Loss
Electrical Performance
Standard filter characteristics are shown. Custom requirements are available in many arrangements. filter types may be mixed within a connector as well as grounded and/or unfiltered pins may be added. Please contact the factory for your specifications and delivery requirements.
Pi Filter
| CAPACITANCE INDICATOR |
5 |
4 |
3 |
2 |
1 |
| STD.
OPERATING TEMP. RANGE |
-55°C
to +125°C |
| WORKING
VOLTAGE |
100 VDC |
200
VDC |
| CURRENT
RATING RF |
3.0
amps min. (higher available upon request |
| INSULATION
RESISTANCE/ D.W.V. |
5000 megohms
min at 100 VDC |
5000
megohms min at 100 VDC |
| CAPACITANCE
IN PICOFARADS AT 1 kHz, .1 VRMS |
32,000
45,000 |
8000
12,000 |
3300
5000 |
850
1300 |
400
600 |
ATTENUATION
MINIMUMS
per MIL-STD-220 at 25°C
without bias Voltage or current |
Freq.
MHz |
8 |
2 |
- |
- |
- |
| 1 |
| 5 |
20 |
10 |
3 |
- |
- |
| 10 |
40 |
18 |
9 |
5 |
3 |
| 100 |
60 |
60 |
45 |
32 |
23 |
| 500
to 1000 |
62 |
62 |
55 |
50 |
38 |
C Filter
| CAPACITANCE INDICATOR |
5 |
4 |
3 |
2 |
1 |
| STD.
OPERATING TEMP. RANGE |
-55°C
to +125°C |
| WORKING
VOLTAGE |
100 VDC |
200
VDC |
| CURRENT
RATING RF |
3.0
amps min. (higher available upon request |
| INSULATION
RESISTANCE/ D.W.V. |
5000 megohms
min at 100 VDC |
5000
megohms min at 100 VDC |
| CAPACITANCE
IN PICOFARADS AT 1 kHz, .1 VRMS |
16,000
22,500 |
4000
6000 |
1650
2500 |
425
650 |
200
300 |
ATTENUATION
MINIMUMS
per MIL-STD-220 at 25°C
without bias Voltage or current |
Freq.
MHz |
5 |
- |
- |
- |
- |
| 1 |
| 5 |
15 |
2 |
- |
- |
- |
| 10 |
26 |
8 |
5 |
3 |
- |
| 100 |
42 |
30 |
25 |
20 |
15 |
| 500
to 1000 |
50 |
43 |
40 |
33 |
30 |
|
|
Contact Cooper Interconnect
750 West Ventura Boulevard
Camarillo, CA 93010
P: (805) 484-0543
F: (805) 987-5062
info@cooperinterconnect.com
EMI/RFI Filter Connectors |
|